New announcement. Learn more



So many times, in any kind of workshop; automotive, wood working, engineering a job can be held up for days waiting for a small replacement part that snapped. It would be a much better use of time to simply repair the part. That’s where the JB Weld range has you covered when it comes to bonding with three products that enable you to bond anything from glass and tiles to fibreglass and wood.

When it comes to bonding hard plastics, ABS, fibreglass, PVC, glass, vinyl or composite materials PlasticWeld will do the job quickly and hold fast.

 PlasticWeld is a high strength epoxy adhesive that is quick setting and will bond rigid plastics such as PVC, ABS as well as glass, tiles and metals. It features a high bond strength, cures within five minutes and is clear after curing. It sets in 5 minutes at room temperature and is fully cured in one hour.

Using a 1:1 mixing ratio, PlasticWeld combines to a tensile strength of 3900 PSI.

 PlasticBonder Tan or Black

Plastic Bonder Tan and PlasticBonder Black are similar products one sets in a tan colour the other black and these can be used for filling dents, repairing bumper bars, automotive trim, composite panels, fibreglass and a host of plastic parts. This is a quick setting, two-part urethane adhesive.

 PlasticBonder Tan and PlasticBonder Black are strong but flexible adhesives that provides long lasting bonds and can be used as gap fillers in many plastics. This flexible bonder cures in just 30 minutes.

 These two products are both quick-setting, two-part, urethane adhesives that provide strong and lasting repairs and work on thermoset, carbon fibre composites, thermoplastics, coated metals, as well as concrete.

 Using PlasticBonder Tan or Black with a mixing ratio of 1:1 will set in 15 minutes and can be sanded after 30 minutes and offer a tensile strength of 3770 PSI.

These products are not for use on polypropylene or polyethylene.